Home>Troubleshooting>Paper Jam in Paper Tray

FAQ

Print
Scan
Fax
Copy
User Box
Driver
Operation Management
Software
Control Panel
Other
Troubleshooting
- When a Paper/Staple Jam Is Occurring
- Main Messages and Remedies
- When Printing Quality Has Deteriorated
  - Cleaning the Electrostatic Charger
  - Cleaning the Print Head Glass
- When the Machine Cannot Be Powered On
- When the Touch Panel Is Not Visible
- Cannot Print
- Cannot Perform Network Fax/Network Scan
- Cannot Use the Fax Function
- Cannot Copy
  - Cannot Copy
  - Main Messages and Remedies
- Cannot Save in a User Box
- Cannot Perform User Authentication
  - Cannot Perform Server Authentication
- Network Error Codes
- When the Bit Count Does Not Match between the Server and the Client
- When a Message Appears to Replace Consumables or Carry Out Cleaning

Paper Jam in Paper Tray

The figure above shows the Paper Feed Cabinet PC-210 installed.

Be careful not to touch the surface of the Transport Roller with your hand.

The area around the fusing unit is hot. To avoid a burn injury, be careful not to touch any parts except for the specified knob and dial.
In case your hand or any other part of your body comes in contact with the heated section, immediately run it under cold water and seek medical assistance.
Carry out this work carefully so that you keep the inside of the machine, your clothing and hands free from toner contamination.
If any toner does get on your hand, wash it off using water or neutral detergent.
If any toner gets into your eyes, immediately wash it out with water and consult your doctor.