Home>Descriptions of Functions / Utility Keys>Horizontal Punch (Z-Fold) Position Adjustment

Descriptions of Functions / Utility Keys

Horizontal Punch (Z-Fold) Position Adjustment

To display: >>View
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [Horizontal Punch (Z-Fold) Position Adjustment]

If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions.

Copy after configuration, then repeat adjustments as required.

Settings

Description

[-]/[+]

Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].

  • [-]: Move the punch position to the left.

  • [+]: Move the punch position to the right.

[0.0 mm] is specified by default.

  • This item is available when the optional Finisher FS-535 and the Z-Fold Unit are installed.

  • Make adjustment while checking a sheet of paper having punched holes that are not in the correct positions.