Home>Descriptions of Functions / Utility Keys>Punch Regist Loop Size Adjustment

Descriptions of Functions / Utility Keys

Punch Regist Loop Size Adjustment

To display: >>View
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [Punch Regist Loop Size Adjustment]

If the positions of the punch holes on the paper are not in parallel with the paper edge, use this option to correct the obliquity of the paper to make them parallel.

Settings

Description

[Finisher]/[Finisher (Z-Fold)]/[Post Inserter Feeder Upper Tray]/[Post Inserter Feeder Lower Tray]

Select the position subject to paper inclination adjustment.

  • [Finisher]: This item is available if Punch Kit is installed in the optional Finisher.

  • [Finisher (Z-Fold)]: This item is available if the Z Folding Unit is installed in the optional Finisher FS-535.

  • [Post Inserter Feeder Upper Tray]: This item is available if Punch Kit PK-521 and Post Inserter are installed in the optional Finisher FS-535.

  • [Post Inserter Feeder Lower Tray]: This item is available if Punch Kit PK-521 and Post Inserter are installed in the optional Finisher FS-535.

[Paper Type]

Select the type of paper that is used to adjust the inclination.

[Adjust Value]

Enter an adjustment value by tapping [-] and [+].

  • [+]: Tap this button to adjust the inclination of the paper.

  • [-]: Tap this button if it is not possible to adjust the inclination with [+] or paper creases.

The available adjustment value is between -5.0 mm and 5.0 mm (other than [Finisher (Z-Fold)]) or between -16.0 mm and 16.0 mm ([Finisher (Z-Fold)]).

[0.0 mm] is specified by default.

  • Make adjustment while checking a sheet of paper having punched holes that are not in the correct positions.