Home>Descriptions of Functions / Utility Keys>Punch Horizontal Position Adjustment

Descriptions of Functions / Utility Keys

Punch Horizontal Position Adjustment

To display: >>View
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [Punch Horizontal Position Adjustment]

If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions.

Copy after configuration, then repeat adjustments as required.

Settings

Description

[Finisher]/[Post Inserter]

Select the position subject to punch hole position adjustment.

  • [Finisher]: This item is available if Punch Kit is installed in the optional Finisher.

  • [Post Inserter]: This item is available if the Punch Kit PK-521 and Post Inserter are installed in the optional Finisher FS-535.

[Adjust Value]

Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].

  • [-]: Move the punch position to the left.

  • [+]: Move the punch position to the right.

[0.0 mm] is specified by default.

  • Make adjustment while checking a sheet of paper having punched holes that are not in the correct positions.