The procedure for loading paper is common between Tray1 and Tray2. The following explains how to load paper into Tray1.
Pull out Tray1.
Be careful not to touch the Film.
Slide the Lateral Guide to fit the size of the loaded paper.
Load paper into the tray with the print side facing up.
When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing down.
For details on the available paper sizes, refer to Here.
Do not load an excessive number of sheets such that the top of the stack is higher than the mark.
If paper is curled, flatten it before loading it.
Close Tray1.
When you change the paper type or change to custom size paper, proceed to step 5 to change the setting on this machine.
When you do not change the paper type or change to custom size paper when adding paper, you can use the current setting without making any changes.
Change the paper type and paper size settings.
When loading paper other than plain paper, change the paper type setting. For details, refer to Here.
When loading custom sized paper, change the paper type setting. For details, refer to Here.