HomeDescriptions of Functions / Utility KeysStaple

Staple

To display:

[Copy]
- [Finishing]
  - [Staple]

Select the binding positions for sheet stapling.

Settings	Description
[Corner]	Each set of printed sheets is stapled in a corner (top left or top right) before it is output.
[2 Position]	Each set of printed sheets is stapled at two positions (in the top, left, or right) before it is output.
[Position Setting]	Select the binding position and original loading direction. If [Auto] is specified for the binding position, the binding position is determined automatically based on the direction of the loaded original. When stapling paper at the upper-left corner, you can specify the staple angle (only in bizhub C658/C558/C458). If [Auto] is selected in [Set Staple Position], the staple angle is automatically determined depending on the paper size.

Settings

Description

[Corner]

Each set of printed sheets is stapled in a corner (top left or top right) before it is output.

[2 Position]

Each set of printed sheets is stapled at two positions (in the top, left, or right) before it is output.

[Position Setting]

Select the binding position and original loading direction. If [Auto] is specified for the binding position, the binding position is determined automatically based on the direction of the loaded original.

When stapling paper at the upper-left corner, you can specify the staple angle (only in bizhub C658/C558/C458). If [Auto] is selected in [Set Staple Position], the staple angle is automatically determined depending on the paper size.

To use the Staple function, the optional Finisher is required.