Original > Output

[Original > Output]

Select a combination of the original to be loaded (1-sided original or 2-sided original) and the copy method (1-sided copy or 2-sided copy).

If you have selected other than [1Sided > 1Sided], also specify [Binding Position] and [Original Direction].

[Binding Position]

Select the binding positions of the original and copy.

[No. of Originals]

Select the original binding position when a 2-sided original is loaded.

• [Auto]: The binding position is specified automatically. When the long side of the original is 11-11/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of the paper.

• [Left Bind]: Select this option when the binding position is set to the left of the original.

• [Right Bind]: Select this option when the binding position is set to the right of the original.

• [Top Bind]: Select this option when the binding position is set to the top of the original.

[Output]

Select the binding position when printing on both sides of paper.

• [Auto]: The binding position of a copy is specified automatically. When the long side of the original is 11-11/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of the paper.

• [Left Bind]: Select this option when setting the binding position to the left of a copy.

• [Right Bind]: Select this option when setting the binding position to the right of a copy.

• [Top Bind]: Select this option when setting the binding position to the top of a copy.

[Original Direction]

Specify the orientation of the loaded original.