Home>Introduction>Loading the Original into the ADF (bizhub C364e/C284e/C224e)

Loading the Original into the ADF (bizhub C364e/C284e/C224e)

Original available for ADF

Reverse Automatic Document Feeder DF-624

Item

Specifications

Original types

1-Sided

Thin paper (9-5/16 lb to 13-1/16 lb (35 g/m2 to 49 g/m2))

Plain paper (13-5/16 lb to 34-1/16 lb (50 g/m2 to 128 g/m2))

2-Sided

Plain paper (13-5/16 lb to 34-1/16 lb (50 g/m2 to 128 g/m2))

Mixed original

Plain paper (13-5/16 lb to 34-1/16 lb (50 g/m2 to 128 g/m2))

Original Size

1-Sided/2-Sided Originals: 11 17 to 5-1/2 8-1/2 , A3 to A6

Original loading capacity

1-Sided/2-Sided Originals: Max. 100 sheets (21-1/4 lb (80 g/m2))

Dual Scan Document Feeder DF-701

Item

Specifications

Original types

1-Sided

Thin paper (9-5/16 lb to 13-1/16 lb (35 g/m2 to 49 g/m2))

Plain paper (13-5/16 lb to 43-3/8 lb (50 g/m2 to 163 g/m2))

2-Sided

Plain paper (13-5/16 lb to 43-3/8 lb (50 g/m2 to 163 g/m2))

Mixed original

Plain paper (13-5/16 lb to 34-1/16 lb (50 g/m2 to 128 g/m2))

Original Size

1-Sided/2-Sided Originals: 11 17 to 5-1/2 8-1/2 , A3 to A6

Original loading capacity

1-Sided/2-Sided Originals: Max. 100 sheets 21-1/4 lb (80 g/m2)

Do not load the following originals into the ADF. Doing so may cause an original paper jam, or damage the originals.

  • Wrinkled, folded, curled, or torn originals

  • Highly translucent or transparent originals, such as OHP transparencies or diazo photosensitive paper

  • Coated originals such as carbon-backed paper

  • Original that is less than basic weight 9-5/16 lb (35 g/m2) or greater than 34-1/16 lb (128 g/m2) (Reverse Automatic Document Feeder DF-624)

  • Original that is less than basic weight 9-5/16 lb (35 g/m2) or greater than 43-3/8 lb (163 g/m2) (Dual Scan Document Feeder DF-701)

  • Originals that are bound, for example, with staples or paper clips

  • Originals that are bound in booklet form

  • Originals with pages bound together with glue

  • Originals with pages that have had cutouts removed or are cutouts

  • Label sheets

  • Offset printing masters

  • If there are too many original sheets that cannot be loaded into the ADF at the same time, you can load them in several batches and handle them as one job. For details, refer to Here.

  • For an original with pages of different sizes, you can collectively load them into the ADF, and scan data while detecting the size for each page. For details, refer to Here.

Loading the original into the ADF

The ADF feeds original sheets one by one in order from the top, and automatically loads them. It also loads a 2-sided original automatically.

The ADF is helpful when loading a large number of original.

  1. Widen the Lateral Guide.

  2. Put the first page of an original at the top, and load the original into the Original Tray with the required side facing upward.

    • Load the original so that its top side is placed at the back. When loading in a different orientation, be sure to specify the loading direction of originals.

    • For details on the loading direction of originals, refer to Here.

    • Do not load more than 100 sheets at a time into the Original Tray, and do not load the sheets up to the point where the top of the stack is higher than the mark. Doing so may cause the originals to jam, damage the originals and/or ADF failure. However, if the original contains more than 100 pages, it can be scanned separately.

  3. Slide the Lateral Guide to fit the loaded original.